890557_d•en•01.07.2014
We reserve the right to carry out improvements
64
Wisotronic 1-channel
Operating instructions
7.2.5 Intermittent ventilation
Intermittent ventilation is another comfort function of the Wisotronic that al-
lows windows to be switched on a channel via a timer. It serves, on the one
hand, to prevent mould formation from humidity or condensation and, on the
other hand, to ensure a pleasant climate in your rooms and conservatories
through an adequate supply of fresh air.
NOTE It is useful to also activate cold protection in addition to intermittent ventila-
tion (see Chapter 7.2.7 on page 71) to prevent excessive cooling down of
your conservatory/rooms.
In the main menu, press the function button [Sett.]. Now proceed to the
[Comfort functions] > [Intermittent ventilation] menu.
The following view appears in the display (the header may show the channel
name you selected instead of Channel1 and the setting values may be dif-
ferent):
7.2.5.1 Intermittent ventil. ON/OFF
In this menu line, you can activate or deactivate intermittent ventilation.
Set or delete the checkmark in the line [Intermittent ventil. ON/OFF]
to activate or deactivate the intermittent ventilation.
The function button [Stand.] sets the product-specific factory setting.
7.2.5.2 Ventilation duration hh:mm
In this menu line, you can set the duration in hours and minutes for which
ventilation should be performed by opening a window.
Turn the touchwheel to set the “Ventilation duration hh:mm” value. Pressing
on the wheel causes the display to jump to minutes. Set the minutes in the
same manner.
The function button [Stand.] selects the factory setting.
Start menu
Main menu
Settings
Comfort functions
Intermittent ventilation
Intermittent ventil.
To Next Page
Loading...
