WAREMA Wisotronic - Break Duration Hh:MM; Ventilation Step; Active During Leave; Active During Absence

890557_d•en•01.07.2014 We reserve the right to carry out improvements
65
7.2.5.3 Break duration hh:mm
In this menu line, you can set the duration in hours and minutes for which
intermittent ventilation is interrupted.
 Turn the touchwheel to set the “Break duration hh:mm” value. Pressing on
the wheel causes the display to jump to minutes. Set the minutes in the same
manner.
The function button [Stand.] sets the pause duration to the factory setting.
7.2.5.4 Ventilation step
In this menu line, you can set the level of the intermittent ventilation in per-
cent. The setting range is 0...100%.
 Turn the touchwheel to set the value “Ventilation step”.
The function button [Stand.] sets the product-specific factory setting.
7.2.5.5 Active during leave?
In this menu line, you can activate or deactivate intermittent ventilation during
your leave.
 Set or delete the checkmark in the line [Active during leave?]
to activate or deactivate intermittent ventilation during your leave.
The function button [Stand.] sets the product-specific factory setting.
7.2.5.6 Active during absence?
In this menu line, you can activate or deactivate intermittent ventilation during
your absence.
 Set or delete the checkmark in the line [Active during absence?]
to activate or deactivate intermittent ventilation during your absence.
The function button [Stand.] sets the product-specific factory setting.
Intermittent ventil.