上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
16 / 97
3 Basic Commissioning
Through this section, you can quickly know the basic commissioning processes of
NK105.
To do basic commissioning, do the following:
1. Start the system.
2. Select the axis mode. (General NK105 with double Z axes)
3. Activate the axis. (General NK105 with double Z axes)
4. Adjust the port polarity.
5. Set pulse equivalent.
6. Adjust the axis direction.
7. Set the workbench travel.
8. Set the machine origin.
9. Set the spindle.
If the modification to parameters requires the manufacturer password, please
contact us.
Note: Symbol * before a parameter means the modification requires restarting the system; No Symbol *
means the modification immediately takes effect.
3.1 Start the System
Power on and start the system. The prompt Back to REF. point? appears:
• If you want to return to the machine origin, press .
• If not, press .
To Next Page
Loading...
