上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
40 / 97
4. To select the stop mode, select 1. Park Mode by pressing / ,
press , and do one of the following:
– Select Not Move or To MCS Origin by pressing / , and
press .
– Select To Park Site by pressing / , press ,
select 2. Park Site, and set the stop position by inputting coordinates of
each axis or specifying the current position to stop.
5.5 Use Array Machining
This operation is used to set the row number, column number, row space and
column space for array machining. After setting, a program file will be automatically
generated and loaded.
To use array machining, do the following:
1. To enter the menu interface, press .
2. To enter the operation interface, select 3. Operations by pressing /
, and press .
To Next Page
Loading...
