WEIHONG NK105G3 - Tool Change

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
70 / 97
9.1.11 Tool Change
ATC Capacity
• Unit: -
• Range: [1, 20]
• Default value: 10
• Effective: Immediately
• Description: The capacity of the tool magazine.
Current Tool No.
• Unit: -
• Range: [1, ATC Capacity]
• Default value: 1
• Effective: Immediately
• Description: The current tool number.
Tool Offset
• Unit: mm
• Range: [-10000, 10000]
• Default value: 0
• Effective: Immediately
• Description: The tool offset of each axis.
Tool Change Tip
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether the prompt appears when there is a tool change
command in the file.
Cali Coor
• Unit: mm
• Range: -
• Default value: 0
• Effective: Immediately
• Description: The machine coordinate (X/Y/Z) of the tool presetter.