WEIHONG NK105G3 - Offset; Cycle Machining

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
64 / 97
9.1.5 Offset
Public Offset
• Unit: mm
• Range: [-10000, 10000]
• Default value: 0
• Effective: Immediately
• Description: The public offset of X-axis, Y-axis, Z-axis and A-axis.
Work Offset
• Unit: -
• Range: [-10000, 10000]
• Default value: 0
• Effective: Immediately
• Description: The difference value between workpiece origin and machine origin.
9.1.6 Cycle Machining
Cycle Process
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether to enable cycle machining.
Cycle Times
• Unit: -
• Range: [1, 9999]
• Default value: 2
• Effective: Immediately
• Description: The times for cycle machining.
Cycle Interval
• Unit: ms
• Range: [0, 3600000]
• Default value: 0
• Effective: Immediately
• Description: The time interval between two adjacent cycles.