WEIHONG NK105G3 - System Parameters; Operator Parameters; Machining Wizard

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
61 / 97
9 System Parameters
9.1 Operator Parameters
Operator parameters include the following aspects:
• Machining wizard
• Velocity
• Returning to the machine origin before machining
• Z position at pause
• Offset
• Cycle machining
• Command
• Stopping the Spindle
• Override
• File
• Tool change
• Red light
• Calibration height
• Tool compensation
9.1.1 Machining Wizard
Engr Dpth
• Unit: -
• Range: [Each Dpth, -]
• Default value: -
• Effective: Immediately
• Description: The engraving depth of tools.
Each Dpth
• Unit: -
• Range: [-, Engr Dpth]
• Default value: -
• Effective: Immediately
• Description: Each down depth of tools.