WEIHONG NK105G3 - Import Parameters; Import the Compensation File

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
46 / 97
6.5 Import Parameters
This operation is used to import parameters in the USB flash disk to the system,
avoiding setting parameters again.
To import parameters, do the following:
1. To enter the menu interface, press .
2. To enter the interface of parameter maintenance, select 6. Param Upkeep by
pressing / , and press .
3. Select 5. Import Params by pressing / , and press .
4. Press for confirmation. NK105 automatically restarts.
6.6 Import the Compensation File
This operation is used to import the file of screw error compensation in th e USB
flash disk to the system. During machining, the system automatically executes
compensation according to this file.
To import the compensation file, do the following:
1. To enter the menu interface, press .
2. To enter the interface of parameter maintenance, select 6. Param Upkeep by
pressing / , and press .
3. Select 6. Import ErrData by pressing / , and press .