上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
41 / 97
3. To enter the interface of array machining, select 7. Array Process by pressing
/ , and press :
4. To enable array machining, select On Array by pressing / ,
input 1 and press :
– 0: Enable array machining. (Default setting)
– 1: Disable array machining.
5. To set the row number, column number, row space and column space, select
Rows, Columns, RowSpace, Colspace by pressing / , input
corresponding values and press .
5.6 Save the Workpiece Origin
This operation is used to save the current position as a workpiece origin.
To save the workpiece origin, do the following:
1. To enter the menu interface, press .
To Next Page
Loading...
