上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
53 / 97
4. Press , input the registration code and wait for the result:
– The result is bad: Press and, input the registration code again.
– The result is good: NK105 automatically restarts.
7.8 Set Help Interface
This operation is used to set the delay time of Help interface popping up, and this
delay time is an integer within the range -1 & [1 ~ 999999]. If you set it to -1, Help
interface does not automatically pop up.
To set Help interface, do the following:
1. To enter the menu interface, press .
2. To enter the interface of system maintenance, select 7. System Upkeep by
pressing / , and press .
3. To enter the interface for help settings, select 5. Help by pressing /
.
4. Input the delay time with number buttons, and press .
To Next Page
Loading...
