WEIHONG NK105G3 - Command

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
65 / 97
SOff in Intevl
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether to stop spindle in the cycle interval.
9.1.7 Command
G73_G83 Retract
• Unit: mm
• Range: [0, 1000000]
• Default value: 0
• Effective: Immediately
• Description: The retract or spacing amount of G73_G83 command.
– G73: The retract amount after each feed.
– G83: The distance between the feed plane where the tool changes from
G00 to Gxx and the previous peck depth.
Ignore F code
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether to use the feedrate command in the program file.
Ignore S code
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether to use the spindle command in the program file.