上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
38 / 97
3. To enter the interface of selective machining, select 3. Select Line No by
pressing / , and press :
The start line is the breakpoint position of the current file and the end line is
the last line by default.
4. Modify the start line and end line with the handheld box and click .
5. To immediately start machining, select Execute Now by pressing /
, and press .
5.3 Parse the Simulation Range
This operation is used to parse the loaded file for simulation. The system
automatically calculates the machining duration and machining range of each axis.
To parse the simulation range, do the following:
1. To enter the menu interface, press .
2. To enter the operation interface, select 3. Operations by pressing /
, and press .
To Next Page
Loading...
