上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
22 / 97
3.8 Set the Machine Origin
The machine origin, a fixed point, is defined through designing, manufacturing and
debugging before the machine tool leaves factory.
To set the machine origin, do the following:
1. To enter the menu interface, press .
2. To enter the interface of manufacturer parameters, select 5. Mfr Param by
pressing / , and press .
3. To check the parameters of the machine origin, select 7. REF. Point Set by
pressing / , and press .
About parameter details, see Machine Origin.
4. To set these parameters, select REFP Speed / REFP Dir / Retract Dist by
pressing / , and input the value with the handheld box. The
prompt The parameters are modified. Restart? appears.
5. To validate the setting, press . NK105 automatically restarts.
To Next Page
Loading...
