WEIHONG NK105G3 - Restore Back-up Parameters; Restore Parameters to Factory Settings

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
44 / 97
6.2 Restore Back-up Parameters
Before restoring back-up parameters, ensure you have backed up parameters.
Otherwise, the prompt Cannot find the backup file. appears.
To restore back-up parameters, do the following:
1. To enter the menu interface, press .
2. To enter the interface of parameter maintenance, select 6. Param Upkeep by
pressing / , and press .
3. To restore back-up parameters, select 2. Backup Params by pressing
/ , and press . The prompt Sure to restore backup appears.
4. Press for confirmation. The prompt Reboot Immediately? appears.
5. Press for confirmation. NK105 automatically restarts.
6.3 Restore Parameters to Factory Settings
This operation is used to clear all the data and internal parameters stored in the
system memory, when internal files are garbled or the system is upgraded.
To restore parameters to factory settings, do the following:
1. To enter the menu interface, press .
2. To enter the interface of parameter maintenance, select 6. Param Upkeep by
pressing / , and press .