上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
59 / 97
3. Select 4. Inport Diag by pressing / , and press :
– 0 ~ 9 and A ~ F respectively represents input ports GX01 ~ GX16.
– ○ represents the polarity is P.
– ● represents the polarity is N.
8.4 Check Output Ports
This operation is used to check if output ports are normal by running lights.
To check output ports, do the following:
1. To enter the menu interface, press .
2. To enter the diagnosis interface, select 8. Diagnosis by pressing /
, and press .
3. Select 5. Outport Diag by pressing / ,press , and
check if output ports are normal:
– Yes: The running lights under output ports flash in turn, and the
corresponding indication light on the control box flashes.
– No: Contact your developer.
To Next Page
Loading...
