上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
3 / 97
5. A-axis differential signals
About terminal definition of the control box, see Terminal Definition.
Note: It is only applicable to NK105 (E) control box with four axes.
1.1.2 Dimension Drawing (Unit: mm)
The thickness of NK105 (E) control box with four axes is 218.3mm.
The dimension drawing is as follows:
1.2 NK105G3 Handheld Box
This section introduces the button definitions on NK105G3 handheld box and
dimension drawing of the handheld box.
The handheld box is connected to the control box with a connecting cable, jointly
controlling a machine tool. So the moving distance of the handheld box and control
box is limited by the connecting cable.
Note: This handheld box is updating. And you can check the newest usage of a single button and button
combinations in Help Information interface by pressing + .
To Next Page
Loading...
