WEIHONG NK105G3 - Stopping the Spindle; Override

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
66 / 97
9.1.8 Stopping the Spindle
SOFF at Pause
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether to stop the spindle when machining pauses.
SOff at Stop
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether to stop the spindle when machining stops.
SOff at End
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether to stop the spindle when machining ends.
9.1.9 Override
Ration ON MANU
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether the feedrate of manual operations is adjusted by the
override.
Ration ON Jigg
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether the feedrate of fine adjustment is adjusted by the
override.