WEIHONG NK105G3 - Corner Tolerance; Spindle Space; Decreasing Time to Soft Limit; Smoothing Time for Override

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
87 / 97
9.2.23 Corner Tolerance
Corner Toler
• Unit: s
• Range: [0,0.1]
• Default value: 0.1
• Effective: Immediately
• Description: The corner tolerance.
For overall smoothness of workpiece, the tool may not accurately arrive at the
specified position at the connection of each two program segments. When the
difference value between the tool position and the specified position is equal to
the value of this parameter, the system regards the current program segment is
machined.
9.2.24 Spindle Space
Spindles Spac
• Unit: mm
• Range: -
• Default value: 0
• Effective: Immediately
• Description: The space between two spindles in X-axis direction.
9.2.25 Decreasing Time to Soft Limit
Soft Limit Time
• Unit: -
• Range: Yes; No
• Default value: Yes
• Effective: Immediately
• Description: The decreasing time to soft limit.
9.2.26 Smoothing Time for Override
Feed Smooth T
• Unit: ms
• Range: [1,50]
• Default value: 20
• Effective: After restart
• Description: The time to smooth override.