•
If the inerting sequence was not successful, the iGPR control system activates the
inerting failed signal from iGPR to PCS.
6.6.6 Engine maintenance
If you have to do maintenance on the engine or on the iGPR or on the supply line, you have to
start the related maintenance mode, refer to section 8.22 Prepare the engine for standstill
maintenance.
Then the iGPR control system automatically starts the inerting sequence, refer to Para 6.6.5.
X92DF
AA00-8904-00AAA-043A-A
Operation Manual Integrated gas pressure regulation
Winterthur Gas & Diesel Ltd.
- 287 - Issue 002 2020-08
To Next Page
Loading...
