WinGD X92DF - Supply Temperature of the Cooling Water to the SAC Is too Low; Temperature of the Cooling Water Downstream of the SAC Is too High

Tab 10-5 Supply temperature of the cooling water to the SAC is too low
Indication Possible cause Procedure
TE1371A The cooling water supply system
is defective
•
Find the cause and repair the fault.
Tab 10-6 Temperature of the cooling water downstream of the SAC is too high
Indication Possible cause Procedure
TE1381-nnA This is a result of the malfunction
in Table 10-4 - Supply pressure of
the cooling water to the SAC is
too low
•
Do the repair shown there.
This is a result of the malfunction
in Table 10-5 - Supply tempera-
ture of the cooling water to the
SAC is too low
•
Do the repair shown there.
X92DF
AA00-0000-00AAA-410C-A
Operation Manual Malfunctions of systems and components
Winterthur Gas & Diesel Ltd.
- 516 - Issue 002 2020-08