8.5 Do checks during operation - general
During operation, do regular checks of the operating values, refer to section 8.6 Do checks
during operation. This prevents damage to the engine if malfunctions occur.
Compare the values with those given in the acceptance records. This gives a good indication of
the engine performance. If there are unusual differences in the values, find the causes and
repair the faults.
Do not open the covers of the rail unit during engine operation.
NOTE: For data about regular maintenance work refer to the Maintenance Manual.
When the engine is at standstill, do also regular checks of the alarm and safety system, refer to
section 8.7 Do regular safety checks. This prevents damage to the engine if settings have
changed or malfunctions occur.
X92DF
AA00-0000-00AAA-130B-A
Operation Manual Do checks during operation - general
Winterthur Gas & Diesel Ltd.
- 442 - Issue 002 2020-08
To Next Page
Loading...
