Button LED Effect
LOCAL MANUAL CONTROL Green Changes from current control to local manual control, during
control transfer the related two green LEDs flash, then the
green LED shows the current control position
NOTE: The transfer to LOCAL MANUAL CONTROL must
be accepted at the control room console.
ECR REMOTE CONTROL Green Changes from local manual control to ECR remote control,
during control transfer the two green LEDs flash, then the
green LED shows the current control position
ECR MANUAL CONTROL Green Changes from local manual control to ECR manual control,
during control transfer the two green LEDs flash, then the
green LED shows the current control position
BRIDGE REMOTE CONTROL Green Changes from local manual control to bridge remote control,
during control transfer the two green LEDs flash, then the
green LED shows the current control position
SAFETY SYSTEM RESET Red Sends a request for reset to the engine safety system
When a shutdown is active, the red LED comes on.
SHD OVERRIDE Red Overrides the shutdown signals, when the red LED flashes or
comes on constantly
SLOW TURNING FAIL/RESET Red Resets a slow turning failure
SOUND OFF-ALM. ACKN. Green Sets to OFF the acoustic alarms (bell or buzzer) and changes
alarm indications that flash to alarm indications that come on
constantly
Shows data about the version and does a check of the soft-
ware on the display, when you push the button for approxi-
mately five seconds
X92DF
AA00-4618-00AAC-043B-A
Operation Manual Local control cabinet - general
Winterthur Gas & Diesel Ltd.
- 408 - Issue 002 2020-08
To Next Page
Loading...
