PROCEDURE
1 Make sure that all values for operation are in the correct range, refer to section 11.2 List
of usual values and safeguard settings - general.
2 Prepare the control system for operation.
2.1 Set to ON the engine control system (ECS) and the remote control system
(RCS).
2.2 Set to ON all circuit breakers in the power supply box E85.
2.3 Set to ON the control box for the cylinder oil filter (refer to the documentation of
the manufacturer).
X92DF
AA00-0000-00AAA-121A-A
Operation Manual Prepare the engine before start
Winterthur Gas & Diesel Ltd.
- 431 - Issue 002 2020-08
To Next Page
Loading...
