PROCEDURE
1 Select the applicable control console.
2 To change the speed, do the steps that follow:
2.1 Use the rotary button to select the fuel command button.
2.2 Turn the rotary button to set the related fuel injection quantity.
NOTE: Refer to the time limits given in section 8.8 Maneuver the ship -
general.
3 To operate the engine in the opposite direction, do the steps that follow:
3.1 Use the rotary button to select the fuel command button.
3.2 Turn the rotary button to set the fuel injection quantity to approximately 30%.
3.3 Push the related button START AHD or START AST.
NOTE: After some minutes the engine operates in the opposite direction.
CLOSE UP
• None
X92DF
AA00-0000-00AAA-131C-A
Operation Manual Maneuver the ship
Winterthur Gas & Diesel Ltd.
- 455 - Issue 002 2020-08
To Next Page
Loading...
