PROCEDURE
1 Make sure that the auxiliary systems continue to operate.
2 If possible, keep the cooling water warm to prevent too much temperature decrease of
the engine.
3 Open the indicator valves in the cylinder covers.
4 Engage the turning gear.
WARNING
Injury hazard. Before you operate the turning gear, make sure that no personnel are near
the flywheel, or in the engine.
5 Operate the turning gear for a short period at the intervals that follow:
•
Daily in damp climate
•
Weekly in usual climate.
6 Stop the turning gear so, that the pistons stop in different positions each time.
CLOSE UP
• None
X92DF
AA00-0000-00AAA-151A-A
Operation Manual Prepare the engine for a short service break
Winterthur Gas & Diesel Ltd.
- 481 - Issue 002 2020-08
To Next Page
Loading...
