Wolf COB-2 - Connecting the Neutralising Box

Installation
3066501_201910 WOLF GmbH | 37
5.8.3 Connecting the neutralising box
Neutralising box installation instructions
NOTE
Escaping water!
Water damage
► Check neutralising box for leaks.
► The neutralising box must be lled with water prior to commissioning to check for leaks.
✔ All connections are tted without leaks.
► Observe the neutralising box installation instructions.


Fig. 5.13 Trap with neutralising box
q Trap w Neutralising box (optionally with condensate
pump)