Xerox Copycentre C118 User Manual

9 Setups
132 Xerox CopyCentre/WorkCentre 118 User Guide
NOTE: To enable the Auditron feature for the printer, you need to change the setting
of [Auditron (Print)] using CentreWare Internet Services. For how to change the
setting, refer to Auditron (Print) in the CentreWare Internet Services chapter on
page 105.
1. Select [Auditron Admin.] on the [System
Settings] screen using the <Select>
button.
2. Press the <Enter> button.
3. Select the required option using the <Select> buttons.
4. Press the <Enter> button.
Auditron Mode
Specify whether to enable or disable the Auditron feature.
Create/Delete
Displays the [Create/Delete] screen. You can register a new account or change the
settings for each account.
Reset Acc. Limit
Resets the upper limits imposed on the number of prints for all accounts.
Reset Impressions
Resets the total number of prints counted for all accounts.
Delete All Accounts
Deletes all registered accounts.
[Create/Delete] Screen
This screen allows you to register accounts, specify the upper limit to be imposed on
the number of prints for each account, and reset the total number of prints counted for
each account.
1. Select [Create/Delete] on the [Auditron
Administration] screen, using the
<Select> button.
2. Press the <Enter> button.
3. Select an account number (01 to 50) using the <Select> buttons.
4. Press the <Enter> button.
5. If you are registering a new account, enter a 4-digit password to be assigned to
the account, using the alphanumeric keypad. If you selected a registered account
in step 3, the password entry field does not display.
6. Select the required option.

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English