Xerox Copycentre C118 User Manual

11 Problem Solving
184 Xerox CopyCentre/WorkCentre 118 User Guide
Image loss • When copying a document from a larger
paper size to a smaller size, reduce the
image to fit onto the smaller paper size.
• Set a slightly smaller document size (for
example, copy 90% instead of 100%).
• Select [Auto] on the [Paper Supply]
screen.
Misfeeds in the Tray 5 (bypass tray) • Remove the paper and reload the tray. Do
not add paper to the tray when paper is
already loaded. Instead, remove the paper,
combine the additional paper with the
paper from the tray and then reload the
tray.
• Check that paper tray guides are locked
into position against the paper.
• Check that the settings for Tray 5 (bypass
tray) are correct and match the paper size
and type on the screen.
Jams in the document feeder • Open the document feeder and check that
no paper or objects are inside.
• Check that the document feeder cover on
the document feeder is firmly closed.
• Refer to Document Jams on page 177 for
procedures.
Paper jams • Use only recommended media.
• Check that the paper is loaded correctly.
• Flip the paper over in the paper tray.
• Check that the paper tray guides are
locked into position.
• Do not use media that is torn, wrinkled, or
folded.
• Load fresh paper.
• Refer to Paper Jams on page 172 for
procedures.
Paper curls • Check that the paper is loaded correctly.
Load paper in Trays 1, 2, 3 and 4 seam
side up.
• Load paper in Tray 5 (bypass tray) seam
side down.
• Load custom media in the Tray 5 (bypass
tray).
• Refer to the Paper and Other Media
chapter for procedures.
Paper delivered to an output tray is not
properly stacked up.
• Flip over the paper stack in the paper tray,
or rotate it head to toe.
Symptom Recommendation

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English