Need help?Do you have a question about the Yamaha MT-01 T 2005 and is the answer not in the manual?
General| Year | 2005 |
|---|---|
| Manufacturer | Yamaha |
| Model | MT-01 T |
| Category | Naked bike |
| Displacement | 1670 cc |
| Bore x Stroke | 97.0 x 113.0 mm |
| Compression Ratio | 8.36:1 |
| Fuel System | Fuel injection |
| Ignition | TCI |
| Lubrication | Wet sump |
| Clutch | Wet, multiple-disc |
| Transmission | 5-speed |
| Final Drive | Chain |
| Frame | Aluminum die-cast |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brakes | Double disc |
| Rear Brakes | Single disc |
| Rear Tire | 190/50-ZR17 |
| Overall Length | 2185 mm |
| Overall Height | 1105 mm |
| Seat Height | 825 mm |
| Wheelbase | 1525 mm |
| Ground Clearance | 140 mm |
| Dry Weight | 240 kg |
| Maximum Torque | 150.3 Nm (15.3 kgf-m) @ 3750 rpm |
| Overall Width | 800 mm |
| Fuel Capacity | 15.0 litres |
| Engine Type | V-twin, four-stroke |
| Front Tire | 120/70-ZR17 |
Details engine type, displacement, bore, stroke, compression, oil, and filter specs.
Covers frame, wheels, tires, brakes, suspension, and drive chain specifications.
Details system voltage, ignition, ECU, coils, battery, and lighting specifications.
Specifies torque values for standard fasteners and engine/chassis components.
Outlines recommended checks and adjustments based on mileage and time intervals.
Details procedures for valve clearance, throttle bodies, oil, clutch, and filter maintenance.
Covers adjustments and checks for brakes, tires, steering, suspension, and chain.
Covers removal, disassembly, checking, assembly, and static balance of the front wheel.
Details removal, disassembly, checking, and assembly of the rear wheel and related parts.
Procedures for replacing pads, servicing calipers, master cylinder, and checking discs.
Covers replacing pads, servicing caliper, master cylinder, and checking brake disc.
Details removal, disassembly, checking, assembly, and adjustment of front fork legs.
Steps for removing oil tank, exhaust pipe, EXUP servo motor, and the engine itself.
Procedures for removing, checking, and installing camshafts, rocker arms, and valve lifters.
Circuit diagram and troubleshooting for spark generation and timing.
Circuit diagram, operation, and troubleshooting for the electric starter system.
Circuit diagram and troubleshooting for battery charging issues.
Circuit diagram, ECU self-diagnostics, fault codes, and troubleshooting for FI system.
Lists potential causes for engine starting failures in engine, fuel, and electrical systems.
Details causes for reduced braking performance, including pads, discs, fluid, and hoses.
To Next Page
