Yamaha MT-01 T 2005 - Chassis Specifications

CHASSIS SPECIFICATIONS
2-10
EAS20300
CHASSIS SPECIFICATIONS
Chassis
Frame type Double cradle
Caster angle 25.00°
Trail 103.0 mm (4.06 in)
Front wheel
Wheel type Cast wheel
Rim size 17M/C × MT3.50
Rim material Aluminum
Wheel travel 120.0 mm (4.72 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Rear wheel
Wheel type Cast wheel
Rim size 17M/C × MT6.00
Rim material Aluminum
Wheel travel 117.0 mm (4.61 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Front tire
Type Tubeless
Size 120/70 ZR17 M/C (58W)
Manufacturer/model METZELER/MEZ4J FRONT (Europe)
MICHELIN/PILOT ROAD S (AUS)
Wear limit (front) 1.6 mm (0.06 in)
Rear tire
Type Tubeless
Size 190/50 ZR17 M/C (73W)
Manufacturer/model METZELER/MEZ4 (Europe)
MICHELIN/PILOT ROAD (AUS)
Wear limit (rear) 1.6 mm (0.06 in)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 250 kPa (36 psi) (2.50 kgf/cm²) (2.50 bar)
Rear 290 kPa (42 psi) (2.90 kgf/cm²) (2.90 bar)
Loading condition 90–202 kg (198–445 lb)
Front 250 kPa (36 psi) (2.50 kgf/cm²) (2.50 bar)
Rear 290 kPa (42 psi) (2.90 kgf/cm²) (2.90 bar)
High-speed riding
Front 250 kPa (36 psi) (2.50 kgf/cm²) (2.50 bar)
Rear 290 kPa (42 psi) (2.90 kgf/cm²) (2.90 bar)