Yamaha MT-01 T 2005 User Manual

THROTTLE BODIES
6-4
EAS26970
THROTTLE BODIES
Removing the pressure regulator and rollover valves
Order Job/Parts to remove Q’ty Remarks
Fuel tank Refer to “FUEL TANK” on page 6-1.
Air duct
Refer to “GENERAL CHASSIS” on page
4-1.
1 Pressure regulator cover 1
2
Fuel hose (intake manifold assembly to
pressure regulator)
1 Disconnect.
3 Pressure regulator 1
4 Fuel return hose 1
5 Fuel pipe holder 2
6 Fuel return hose (fuel return pipe to fuel pump) 1
7 Fuel return pipe 1
8 Fuel tank breather hose 1
9 Fuel tank overflow hose 1
10 Fuel tank breather/overflow hose holder 1
11 Fuel tank breather/overflow hose 1
12 Rollover valve hose 4
13 Rollover valve 1 1
T
R
.
.
7 Nm (0.7 m
•
kg, 5.1 ft
•
Ib)
T
R
.
.
7 Nm (0.7 m
•
kg, 5.1 ft
•
Ib)
T
R
.
.
9 Nm (0.9 m
•
kg, 6.5 ft
•
Ib)
6
7
5
5
10
8
9
13
15
14
12
12
12
12
11
2
4
3
1

Yamaha MT-01 T 2005 Specifications

General

Year	2005
Manufacturer	Yamaha
Model	MT-01 T
Category	Naked bike
Displacement	1670 cc
Bore x Stroke	97.0 x 113.0 mm
Compression Ratio	8.36:1
Fuel System	Fuel injection
Ignition	TCI
Lubrication	Wet sump
Clutch	Wet, multiple-disc
Transmission	5-speed
Final Drive	Chain
Frame	Aluminum die-cast
Front Suspension	Telescopic fork
Rear Suspension	Swingarm
Front Brakes	Double disc
Rear Brakes	Single disc
Rear Tire	190/50-ZR17
Overall Length	2185 mm
Overall Height	1105 mm
Seat Height	825 mm
Wheelbase	1525 mm
Ground Clearance	140 mm
Dry Weight	240 kg
Maximum Torque	150.3 Nm (15.3 kgf-m) @ 3750 rpm
Overall Width	800 mm
Fuel Capacity	15.0 litres
Engine Type	V-twin, four-stroke
Front Tire	120/70-ZR17