SPECIAL TOOLS
1-10
EAS20260
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
NOTE:
• For U.S.A. and Canada, use part number starting with “YM-”, “YU-”, or “ACC-”.
• For others, use part number starting with “90890-”.
Tool name/Tool No. Illustration Reference pages
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
1-9, 5-72, 7-91,
7-92, 7-93, 7-96,
7-97, 7-98, 7-99,
7-100, 7-101,
7-102, 7-103,
7-104, 7-106,
7-107, 7-108
Thickness gauge
90890-03079
Narrow gauge set
YM-34483
3-4, 3-5, 5-56
Locknut wrench
90890-04150
3-5
Tappet adjusting tool
90890-04149
3-5
Vacuum gauge
90890-03094
Carburetor synchronizer
YU-44456
3-6
Timing light
90890-03141
Inductive clamp timing light
YU-03141
3-9
10
4
YU-44456
To Next Page
Loading...
