CYLINDER HEADS
5-33
EAS24250
INSTALLING THE CYLINDER HEADS
1. Tighten:
• Cylinder head nuts (M12) “1”–“4”
• Cylinder head nuts (M10) “5”, “6”
NOTE:
• Lubricate the cylinder head nuts with engine
oil.
• Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages.
T
R
.
.
Cylinder head nut (M12)
45 Nm (4.5 m·kg, 32 ft·lb)
T
R
.
.
Cylinder head nut (M10)
39 Nm (3.9 m·kg, 28 ft·lb)
A. Front cylinder
B. Rear cylinder
6
4
2
1
3
5
B
To Next Page
Loading...
