ENGINE SPECIFICATIONS
2-9
Shifting mechanism
Shift mechanism type Guide bar
Shift fork guide bar bending limit 0.025 mm (0.0010 in)
Shift fork thickness 6.26–6.39 mm (0.2465–0.2516 in)
Air filter
Air filter element Oil-coated paper element
Fuel pump
Pump type Electrical
Model/manufacturer 5YU/DENSO
Maximum consumption amperage 4.6 A
Output pressure 392.0 kPa (56.8 psi) (3.92 kgf/cm²)
Fuel injection
Model/quantity INP-101/2
Manufacturer NIPPON INJECTOR
Throttle body
Type/quantity AC40/2
Manufacturer MIKUNI
ID mark 5YU1 00
Throttle valve size #100
Throttle position sensor
Resistance 4.0–6.0 kΩ/blue-black
Output voltage (at idle) 0.63–0.73 V
Fuel injection sensor
Crankshaft position sensor resistance 248–372 Ω/gray-black
Intake pressure sensor output voltage 2.4 V
Engine temperature sensor resistance 0.90–1.10 kΩ at 100 °C (212 °F)
Idling condition
Engine idling speed 850–950 r/min
Intake vacuum 26.6 kPa (7.9 inHg) (200 mmHg)
Oil temperature 80.0–90.0 °C (176.00–194.00 °F)
Throttle cable free play 3.0–5.0 mm (0.12–0.20 in)
To Next Page
Loading...
