4. Disassembly and reassembly
174
(41) Filling with coolant
1) Open the coolant (fresh water) tank filler cap
and fill with coolant.
2) Fill with water until the level in the coolant
recovery tank is between the full and low
marks.
(42) Check fuel injection timing
Refer to 2.2.6(1) in chapter 2.
(43) Test running
Refer to “Adjusting operation” of 2.6 in
chapter 2.
(L)
3JH4E 4.5
4JH4E 6.0
4JH4-TE/ 4JH4-HTE 7.2
(L)
Coolant recovery tank capacity (full) 0.8
To Next Page
Loading...
