Yanmar 4JH4E - Fuel Filter for 4 JH4-TE and 4 JH4-HTE

6. Fuel Injection equipment
240
6.5.2 Fuel filter for 4JH4-TE and 4JH4-
HTE
(1) Fuel filter specifications
Note:
This fuel filter is equipped with water alarm
sensor for water level.
The water alarm sensor is used for C type panel.
(2) Fuel filter inspection
The fuel strainer must be cleaned
occasionally. If there is water or foreign matter
in the strainer bowl, disassemble the strainer
and wash with clean fuel oil to completely
remove foreign matter. Replace the element
every 250 hours of operation or every year,
whichever comes first.
Replace the filter prior to this interval if the
filter is very dirty, deformed or damaged.
Item Unit Specifications
Part No. - 129574-55820
Fuel filter Filtration method - Paper element
Filtration area
m
2
0.24
Filtration accuracy μ 15
Maximum flow L/min 0.8
Pressure loss mm Hg 60 or less
Priming
pump
Discharge
cm
3
/st
15
Stroke mm 8
Water
separation
Maximum capacity
cm
3
120
Priming
pump
Element
Water senso
r
Air bleeding
bolt
Drain plug
Drain tube
010357-00E
Fuel filter