11. Remote control system (Optional)
291
The MN type controller has been designed so
that operation of the clutch and throttle can be
effected with one lever. When the button next
to the control lever is pulled out with the lever
in the central position, it holds the clutch in the
neutral position so that the throttle can be
opened all the way and warm up the engine.
When the engine is warmed up, return the
handle to the central position and push the
button back in. Control of the clutch and
throttle is thus effected with one handle.
(2) Remote control cable
Use only Super Responsive Morse Control
Cables. These are designed specifically for
use with Morse control heads. This
engineered system of Worse cables, control
head and engine connection kits ensures
dependable, smooth operation with an
absolute minimum of backlash.
010658-00X
MN Type
33C
010659-00X
To Next Page
Loading...
