YASKAWA HV600 User Manual

9.13 o: Keypad-Related Settings
642 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
No.
(Hex.)
Name Description
Default
(Range)
Ref.
o1-26
(11AF)
RUN
Custom Monitor 3 Sets Custom Monitor 3. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
Note:
The default setting changes when b5-01 [PID Mode Setting] changes:
• b5-01 = 0 [Disabled]: 103
• b5-01 ≠ 0: 501
Determined by b5-01
(0, 101 - 1299)
358
o1-27
(11B0)
RUN
Custom Monitor 4 Sets Custom Monitor 4. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-28
(11B1)
RUN
Custom Monitor 5 Sets Custom Monitor 5. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-29
(11B2)
RUN
Custom Monitor 6 Sets Custom Monitor 6. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-30
(11B3)
RUN
Custom Monitor 7 Sets Custom Monitor 7. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-31
(11B4)
RUN
Custom Monitor 8 Sets Custom Monitor 8. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-32
(11B5)
RUN
Custom Monitor 9 Sets Custom Monitor 9. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-33
(11B6)
RUN
Custom Monitor 10 Sets Custom Monitor 10. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-34
(11B7)
RUN
Custom Monitor 11 Sets Custom Monitor 11. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-35
(11B8)
RUN
Custom Monitor 12 Sets Custom Monitor 12. You can set a maximum of 12 monitors as user monitors. This
parameter is only available on an HOA keypad.
0
(0, 101 - 1299)
358
o1-36
(11B9)
RUN
LCD Backlight
Brightness
Sets the intensity of the HOA keypad backlight. 5
(1 - 5)
358
o1-37
(11BA)
RUN
LCD Backlight ON/OFF
Selection
Sets the automatic shut off function for the LCD backlight.
0 : OFF
1 : ON
1
(0, 1)
359
o1-38
(11BB)
RUN
LCD Backlight Off-Delay Sets the time until the LCD backlight automatically turns off. 60 s
(10 - 300 s)
359
o1-39
(11BC)
RUN
Show Initial Setup Screen Sets the function to show the HOA keypad initial setup screen each time you energize the
drive. This parameter is only available on an HOA keypad.
0 : No
1 : Yes
1
(0, 1)
359
o1-40
(11BD)
RUN
Home Screen Display
Selection
Sets the monitor display mode for the Home screen. This parameter is only available on an
HOA keypad.
0 : Custom Monitor
1 : Bar Graph
2 : Analog Gauge
3 : Trend Plot
0
(0 - 3)
359
o1-41
(11C1)
RUN
1st Monitor Area
Selection
Sets the horizontal range used to display the monitor set in o1-24 [Custom Monitor 1] as a
bar graph. This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-42 ~ o1-42 )
1 : + Area ( 0 ~ o1-42 )
0
(0 - 1)
360
o1-42
(11C2)
RUN
1st Monitor Area Setting Sets the horizontal axis value used to display the monitor set in o1-24 [Custom Monitor 1]
as a bar graph. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
360

YASKAWA HV600 Specifications

General

Category	DC Drives
Series	HV600
Overload Capacity	150% for 60 seconds
Output Voltage	0 - Input Voltage
Enclosure	NEMA 1, NEMA 12
Communication	Ethernet/IP, Modbus, DeviceNet, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Control Method	Vector Control