YASKAWA HV600 User Manual

Parameter List
9
9.13 o: Keypad-Related Settings
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 643
No.
(Hex.)
Name Description
Default
(Range)
Ref.
o1-43
(11C3)
RUN
2nd Monitor Area
Selection
Selects the horizontal range used to display the monitor set in o1-25 [Custom Monitor 2]
as a bar graph. This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-44 ~ o1-44 )
1 : + Area ( 0 ~ o1-44 )
0
(0 - 1)
360
o1-44
(11C4)
RUN
2nd Monitor Area Setting Sets the horizontal axis value used to display the monitor set in o1-25 [Custom Monitor 2]
as a bar graph. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
360
o1-45
(11C5)
RUN
3rd Monitor Area
Selection
Sets the horizontal range used to display the monitor set in o1-26 [Custom Monitor 3] as a
bar graph. This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-46 ~ o1-46 )
1 : + Area ( 0 ~ o1-46 )
0
(0 - 1)
360
o1-46
(11C6)
RUN
3rd Monitor Area Setting Sets the horizontal axis value used to display the monitor set in o1-26 [Custom Monitor 3]
as a bar graph. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
360
o1-47
(11C7)
RUN
Trend Plot 1 Scale
Minimum Value
Sets the horizontal axis minimum value used to display the monitor set in o1-24 [Custom
Monitor 1] as a trend plot. This parameter is only available on an HOA keypad.
-100.0%
(-300.0 - +300.0%)
361
o1-48
(11C8)
RUN
Trend Plot 1 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-24 [Custom
Monitor 1] as a trend plot. This parameter is only available on an HOA keypad.
100.0%
(-300.0 - +300.0%)
361
o1-49
(11C9)
RUN
Trend Plot 2 Scale
Minimum Value
Sets the horizontal axis minimum value used to display the monitor set in o1-25 [Custom
Monitor 2] as a trend plot. This parameter is only available on an HOA keypad.
-100.0%
(-300.0 - +300.0%)
361
o1-50
(11CA)
RUN
Trend Plot 2 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-25 [Custom
Monitor 2] as a trend plot. This parameter is only available on an HOA keypad.
100.0%
(-300.0 - +300.0%)
361
o1-51
(11CB)
RUN
Trend Plot Time Scale
Setting
Sets the time scale (horizontal axis) to display the trend plot. When you change this setting,
the drive automatically adjusts the data sampling time. This parameter is only available on
an HOA keypad.
300 s
(1 - 3600 s)
361
o1-55
(11EE)
RUN
Analog Gauge Area
Selection
Sets the range used to display the monitor set in o1-24 [Custom Monitor 1] as an analog
gauge. This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-56 ~ o1-56 )
1 : + Area ( 0 ~ o1-56 )
1
(0, 1)
361
o1-56
(11EF)
RUN
Analog Gauge Area
Setting
Sets the value used to display the monitor set in o1-24 [Custom Monitor 1] as an analog
meter. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
361
o1-58
(3125)
Motor Power Unit
Selection
Sets the setting unit for parameters that set the motor rated power.
0 : kW
1 : HP
1
(0, 1)
362
o1-80
(31BA)
Fault Screen Display Sets a full-screen display message to show on the keypad when a fault or CPF occurs.
0 : OFF
1 : ON
1
(0, 1)
362
o1-81
(31BB)
Alarm Screen Display Sets a full-screen display message to show on the keypad when an alarm occurs.
0 : OFF
1 : ON
0
(0, 1)
362
o1-82
(31BC)
Message Screen Display Sets a full-screen display message to show on the keypad when a status message is active.
0 : OFF
1 : ON
0
(0, 1)
362

YASKAWA HV600 Specifications

General

Category	DC Drives
Series	HV600
Overload Capacity	150% for 60 seconds
Output Voltage	0 - Input Voltage
Enclosure	NEMA 1, NEMA 12
Communication	Ethernet/IP, Modbus, DeviceNet, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Control Method	Vector Control