HB700 | CPU | PMC921xEx | en | 24-04 189
Web-based management - WBM
Configuration > Web Services
Self-signed HTTPS certifi-
cate
2. Click on [Apply].
🡆 The certificate is used for authentication in the configuration.
Please note that reconfiguring the web service can affect the
real-time behavior of your system. A
void this during productive
operation.
Web Services
Configuration
Configuration
Network
Date and Time
System Services
Web Services
Information
Diagnostics
Security
Administration
iC92...
PMC92...
...
...
In addition to the HTTPS certificates stored in the CPU, you also have the option of
selecting a self-signed certificate created by the firmware.
1. To do this, select in the selection field ‘
HTTPS-self-signed’.
🡆 The configuration of the self-signed HTTPS certificate is listed in a table. You can
adapt these accordingly and generate new certificate files with [Apply].
2. Enter the according parameters.
â– Distinguished name
– Enter your company information here for identification.
â– Validity
– Enter the date in the format DD.MM.YYYY and the time in hh:mm:ss.
– If at V
alid not before the input field is empty, the current date is used.
– If at V
alid not after the input field is empty, the date 31.12.9999 and time
23:59:59 are used.
â– Subject alternative names
– The IP addresses from the network configuration of the CPU are suggested
by default.
– You have the option of expanding or adapting this or specifying a DNS name.
Use
to add an entry. Use to remove an entry.
If the web server is to be accessible via different IP addresses
without an error message, you have to specify all IP addresses as
Subject alternative names
of the type IP address. If the CPU can be
reached via DNS name, you have also to specify this!
3. To apply the changes, click on [Re-generate HTTPS certificate].
🡆 The certificate is regenerated. This overwrites an existing self-signed HTTPS
certificate.