EasyManuals Logo

YASKAWA iC9200 Series User Manual

YASKAWA iC9200 Series
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
198 HB700 | CPU | PMC921xEx | en | 24-04
Web-based management - WBM
iC9200 Series
Security > Syslog Configuration
Enable SD card deployment
Disable SD card deployment
1. Enable the ‘Support External SD card
parameter.
2. Click on [Apply].
🡆 The setting is saved and only applied when you restart the CPU.
3. Restart the CPU.
🡆
The deployment of the Yaskawa SD card is enabled.
If a new Yaskawa SD card is detected during the initialization phase, the
overlay file system with user program, configurations, user data and firm-
ware adjustments, is moved from the internal parametrization memory to the
Y
askawa SD card and deleted in the internal parametrization memory.
The CPU uses the overlay file system on the Yaskawa SD card, now.
At ‘Status’
External SD card’ is shown.
Please note when using without an Yaskawa SD card!
By default, support for the Yaskawa SD card is enabled.
Disable the support of the Yaskawa SD card if you want to
operate the CPU without YaskawaSD card.
If the support of the Yaskawa SD card remains enabled and
the CPU is operated without a Yaskawa SD card, there is a
risk of data theft or data manipulation.
Unauthorized persons may insert a Yaskawa SD card
and restart the CPU.
If a new, unused Yaskawa SD card is detected after
PowerON, the overlay file system with user program,
configurations, user data and firmware adjustments, is
moved from the internal parametrization memory to the
Yaskawa SD card and deleted in the internal paramet-
rization memory. Projects and IP configurations saved
there are then no longer available!
When changing to operation without Yaskawa SD card, the
overlay file system of the internal parametrization memory
is activated by the CPU after PowerON and is used now.
Please note that
no data are used from the Yaskawa SD
card. There is also no function for transferring back from the
Y
askawa SD card to the internal parametrization memory.
1. Disable the ‘Support External SD card
parameter.
2. Click on [Apply].
🡆 The setting is saved and only applied when you restart the CPU.
3. Restart the CPU.
🡆
The deployment of the Yaskawa SD card is disabled.
The Yaskawa SD card is not recognized by the CPU during the initialization
phase and the overlay file system of the internal parametrization memory is
enabled.
The CPU uses exclusively the internal parametrization memory, now.
At ‘Status’
Internal SD card’ is shown.
6.5.4 Syslog Configuration
Here you can configure Syslog servers. Syslog respectively Syslog-ng is a standard for
transmitting log messages in a network.

Table of Contents

Other manuals for YASKAWA iC9200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YASKAWA iC9200 Series and is the answer not in the manual?

YASKAWA iC9200 Series Specifications

General IconGeneral
BrandYASKAWA
ModeliC9200 Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals