YASKAWA iC9200 Series User Manual

200 HB700 | CPU | PMC921xEx | en | 24-04
Web-based management - WBM
iC9200 Series
Security > User Authentication
Enable or disable Syslog
configuration
3. Specify the following parameters at Filter Options:
■ Facilities
– Here you specify the system type of the log data.
■ Severity Level
– Determine here the severity level from which the log data is sent to the
Syslog server
.
Level 1: >= Internal (debug): All messages are sent.
Level 2: >= Information (info): Messages >= level 2 are sent.
Level 3: >= Warning (warning): Messages >= level 3 are sent.
Level 4: >= Error (err): Messages >= level 4 are sent.
Level 5: >= Critical Error (crit): Messages >= level 5 are sent.
Level 6: >= Fatal Error (alert): Messages >= level 6 are sent.
Level 7: Emergency (emerg) Only emergency messages are sent.
4. Click at [OK].
🡆 The dialog is closed and the Syslog server is listed in the table.
Y
ou can remove entries with
and edit them with .
Syslog Configuration
Security
Security
Certificate Authentication
F
irewall
SD Card
Syslog Configuration
User Authentication
Information
Diagnostics
Configuration
Administration
iC92...
PMC92...
1. By selecting or deselecting the control field of ‘Syslog Server Destination Activation
’
at ‘Syslog Configuration’ you can enable respectively disable the Syslog server
targets specified in the table.
2. Click on [Apply].
🡆 The settings are accepted.
6.5.5 User Authentication
■ At ‘User Authentication
’ you can enable or disable user authentication.
■ If user authentication is enabled, you have access to definable components of the
CPU and functions in
iCube Engineer exclusively by specifying user name and pass-
word.
■ If user authentication is disabled, access takes place without a user query. The areas
for the administrator remain password-protected.
− By default user authentication is enabled. On delivery, the "Admin"
user is already created with administrator rights.
− Please note that by disabling the user authentication you endanger
the security of your system against unauthorized access!
−
Use the administrator password printed on the CPU only for the initial
login to the WBM.
− After you have successfully logged in, you should change the admin-
istrator password for security reasons.

YASKAWA iC9200 Series Specifications

General

Brand	YASKAWA
Model	iC9200 Series
Category	Industrial Equipment
Language	English