208 HB700 | CPU | PMC921xEx | en | 24-04
Web-based management - WBM
Administration > License Management
Tab: ‘V
iew Containers’
Tab: ‘Offline Activation
’
5. Click on [Start Update].
🡆 The firmware file is transferred to the CPU and the firmware update is started.
The status of the file transfer and the status of the update process are shown in
the WBM as a progress bar
.
6. The connection to the CPU is interrupted during the firmware update. After the
start-up of the CPU you have to log on to the WBM of the CPU again. This will
refresh the WBM pages.
7. To check the firmware update, in WBM, go to ‘Information 🠂 General Data’ page.
⮫
‘General Data’...page 176
🡆 The new firmware version should be shown here. Otherwise start the update
again. If the update does not work, please contact our support.
6.6.3 License Management
Here you can view and manage the licenses that are installed on the CPU. Several
licenses can be combined in one ‘container
’.
Information
Diagnostics
Configuration
Security
iC92...
PMC92...
Administration
iCube Apps
F
irmware Update
Lisence Management
Licence Management
Administration
In the table all containers with the licenses are listed. The [Refresh] button reloads the
list.
■ Container
– Serial number of the container in which the licenses are managed.
■ Storage Location
– Storage location where the container is stored.
■ Firm Code
– Identification number of the licensor.
■ Firm Text
– Description of the licensor.
■ Product Code
– Unique identification code of the licensed software.
■ Feature Map
– Information on the functional scope of the software.
■ Product Text
– Description of the license.
Here you can activate a previously purchased license of
fline by means of a license file.
The term "offline" in this context means that the CPU on which the licensed software
is running does not have to be connected to the Internet. The offline activation wizard
guides you through the activation process and provides further information.
To Next Page
Loading...
Need help?
General
