86 HB700 | CPU | PMC921xEx | en | 24-04
Deployment CPU iC921xM-EC
Programming and file system
PLCnext Technology
Programming
NOTICE
Device failure due to operation above the permissible specifications for vibra-
tion and shock
Operating the CPU above the permissible vibration and shock specifications
may result in malfunctions or even device failure.
− Make sure that the permissible specifications for vibration and shock are
observed during operation of the CPU.
⮫
‘Approvals, directives, standards’...page 19
NOTICE
Device defect due to reverse polarity
Reversing the polarity puts a strain on the electronics and can lead to a defect
in the CPU.
− To protect the CPU, avoid reversing the polarity of the DC 24V supply.
4.2 Mounting
More information on mounting and wiring ⮫
‘Basics and moun-
ting’...page 22.
4.3 Licensing information for open source software
■ The CPU works with a Linux operating system.
■ You can access license information for the individual Linux packages in Web-based
management (WBM) via the ‘Legal Information
’ button. ⮫‘Web-based management -
WBM’...page 174
■ Every open source software that is used in the product is subject to the respective
license conditions, which are not af
fected by the Yaskawa software license conditions
(Software License Terms - SLT) for the product.
■ The licensee can change the respective open source software in accordance with the
applicable license terms.
Notes on OpenSSL
−
This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (⮫http://www.openssl.org/).
−
This product includes cryptographic software written by Eric Young
(⮫eay@cryptsoft.com).
4.4 Programming and file system
■ The CPU is based on PLCnext Technology
®
from Phoenix Contact.
■ The CPU works with a Linux operating system.
■ You can configure and program the CPU with iCube Engineer according to IEC
61
131-3.