1.1 A: Initialization
YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual 23
Parameter Details
1
Table 1.2 Setting the Password for Parameter Lock
Table 1.3 Check to see if A1-02 is locked (continuing from step 10 above)
Step Display/Result
1. Turn on the power to the drive. The initial display appears. ⇒
2.
Scroll to the Parameter Setup display and press .
⇒
3.
Scroll to the right by pressing .
⇒
4.
Select the flashing digits by pressing .
⇒
5.
Select A1-04 by pressing .
⇒
6.
Press the key while holding down at the same
time. A1-05 will appear.
Note: A1-05 is normally hidden, but can be displayed by following
the directions listed here.
⇒
“05” flashes
7.
Press the key.
⇒
8.
Use , and to enter the password.
⇒
9.
Press to save what was entered.
⇒
10. The display automatically returns to the display shown in step 5. ⇒
Step Display/Result
1.
Press to display A1-02.
⇒
“02” flashes
To Next Page
Loading...
