YASKAWA V1000 User Manual

u
Terms and Abbreviations
TERMSTERMS
• Drive: Yaskawa V1000 Series Drive
• PM motor: Permanent Magnet Synchronous Motor (an abbreviation for
IPM motor or SPM motor)
• IPM motor: Interior Permanent Magnet Motor (e.g., Yaskawa SSR1 Series
motor)
• SPM motor: Surface Mounted Permanent Magnet Motor (e.g., Yaskawa
SMRA Series SPM motor)
• PG: Pulse Generator
• r/min: Revolutions per Minute
• V/f: V/f Control
• OLV: Open Loop Vector Control
• OLV/PM: Open Loop Vector Control for PM
i.1 Preface
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
11

YASKAWA V1000 Specifications

General

Input Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Frequency	0-400 Hz
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Options	Modbus RTU
Ambient Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% (non-condensing)
Cooling Method	Forced Air Cooling
Enclosure	IP20