u
Auto-Tuning Interruption and Fault Codes
If tuning results are abnormal or the STOP key is pressed before completion, Auto-Tuning
will be interrupted and a fault code will be displayed on the digital operator.
A B
A – Normal Auto-Tuning
Display
B – Auto-Tuning Interrupted
Figure 4.14 Auto-Tuning Interruption Display
u
Performing Auto-Tuning
n
Auto-Tuning Procedure
Auto-Tuning should generally be performed in the following steps.
1. Refer to Before Auto-Tuning the Drive on page 113.
2. Determine which type of Auto-Tuning best fits the application requirements following
Figure 4.15.
4.7 Auto-Tuning
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
115
4
Start-Up Programming
& Operation
To Next Page
Loading...
