YASKAWA V1000 User Manual

n
T1-11: Motor Iron Loss (T1-01 = 3)
Provides iron loss information for determining the Energy Saving coefficient. If E2-10 has
been changed and the power has been cycled, the value set to E2-10 will appear as the default
in T1-11. If the value of T1-02 is not changed during Auto-Tuning data input, the drive will
select a value that is typical for the motor power entered to T1-02.
No. Name Setting Range Default
T1-11 Motor Iron Loss 0 to 65535 W
Determined
by o2-04 and
C6-01
4.7 Auto-Tuning
122
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide

YASKAWA V1000 Specifications

General

Input Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Frequency	0-400 Hz
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Options	Modbus RTU
Ambient Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% (non-condensing)
Cooling Method	Forced Air Cooling
Enclosure	IP20