Administrator’s Guide for SIP-T3xG IP Phones
162
4. Select the desired value (0-7) from the pull-down list of Priority.
5. Click Confirm to accept the change.
The web user interface pops up a dialog box to prompt reboot to make the settings
effective.
6. Click OK to reboot the IP phone.
To configure VLAN for PC port via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of PC Port Active.
3. Enter the VLAN ID (0-4094) in the VID field.
To Next Page
Loading...
