Yealink SIP-T38G Administrator's Guide

Troubleshooting
217
Do one of the followings:
 Try to set another available IP address for the IP phone.
 Check the configuration of the network via phone user interface at the path
Menu->Settings->Advanced Settings->Network->WAN Port. If Static IP Client is
selected, select DHCP IP Client instead.
Reset your phone to factory configurations after you have tried almost all
troubleshooting suggestions but do not correct the problem. You need to note that all
customized settings will be overwritten after resetting.
To reset your phone via web user interface:
1. Click on Phone->Upgrade.
2. Click Reset to Factory in the Reset to Factory field.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g